All posts by : chebby

 APA format is required. References should be listed immediately after the question that is being answered. Each question lists a minimum number of unique scholarly references; the textbook is considered one unique reference (per question) regardless of how many times it is used. All references should be from the years 2010 to present day.

1. Give two examples of technologies that have had a big effect on globalization. Use at least three unique references. Length: 4-5 paragraphs. 

2. What are some of the advantages of globalization? Use at least three unique references. Length: 4-5 paragraphs.

3. What is a code of ethics? What is one advantage and one disadvantage of a code of ethics? Use at least three unique references. Length: 4-5 paragraphs.

4. Give an example of how NORA could be used to identify an individual. Use at least three unique references. Length: 4-5 paragraphs.

 Discussion #1: What are some of the major privacy concerns in employing intelligent systems on mobile data? 

Discussion #2: Identify some cases of violations of user privacy from current literature and their impact on data science as a profession. 

After reading the required articles this week, please write a research paper that answers the following questions: 

• What are mobile forensics and do you believe that they are different from computer forensics?
• What is the percentage of attacks on networks that come from mobile devices?
• What are challenges to mobile forensics?
• What are some mobile forensic tools?
• Should the analysis be different on iOS vs Android?

Your paper should meet the following requirements:

• Be approximately 4-6 pages in length, not including the required cover page and reference page.
• Follow APA7 guidelines. Your paper should include an introduction, a body with fully developed content, and a conclusion.
• Support your answers with the readings from the course and at least two scholarly journal articles to support your positions, claims, and observations, in addition to your textbook. The UC Library is a great place to find resources.
• Be clearly and well-written, concise, and logical, using excellent grammar and style techniques. You are being graded in part on the quality of your writing.

1 page 

According to Kirk (2016), most of your time will be spent working with your data.  The four following group actions were mentioned by Kirk (2016):
Data acquisition: Gathering the raw materialData examination: Identifying physical properties and meaningData transformation: Enhancing your data through modification and consolidationData exploration: Using exploratory analysis and research techniques to learnSelect 1 data action and elaborate on the actions performed in that action group.

– apa

– 2 pages

– strictly plagiarism free

 0 Choose one of the organizations described in the “Four Case Studies on Corporate Social Responsibility” article; analyze the information about the organization; and write a 4-page case study paper (2 pages of content). Include in-text citations from at least 2 peer reviewed sources. The case study paper should include the following sections: A. Introduction B. Description of the organization’s original corporate social responsibility (CSR) policies and reporting C. Description of the conflicts D. Description of resultant changes in the CSR policies and reporting E. Conclusion  

Everything is in the document that I uploaded any other information ask me.

1. The PC Build assignment has specific requirements such as using IEEE citations. For most, this will be the first and possibly only time you are required to utilize IEEE standards/formatting. I do not agree with using IEEE due to the remainder of your curriculum at almost any level at any institution utilizing APA formatting. However, no matter what I think, UMUC sets the rules and we must adhere to them, no questions asked. Some other requirements include:

o The PC Build assignment has minimum standards as part of the grading rubric that must be followed as well. You must include your name in the file name you submit in LEO.

o You must include a proper title page.

o Citations must be shown for pictures, paragraphs, and as part of your reference section at the end of the build.

o You must meet the criteria listed for each item in the build.

o You must break the assignment up and submit it as three separate assignments, and not one large one.

o You must include brand and model recommendations for each component so that you can demonstrate a mastery of the material.

o You may resubmit each PC Build draft once, and each must be submitted within 7 days of your original submission. For example, if you submit PC Build Draft 1 on 10/15, you may make changes based on my feedback and resubmit no later than 10/22; after that only your original grade will count.

o NOTE: NO late work is accepted, so you cannot submit or resubmit after the course ends, no exceptions.

2. Failure to follow the instructions above will result in assignments being returned ungraded, or failing grades.

PC Build and Manual (Parts 1-3)

Overview

–

You will provide a comprehensive and detailed manual documenting the step-by-step process for building a computer using the components provided in LabSim 14.1 and for the Video Card only, use information in LabSim 3.12: “Build a Computer from Scratch.” The manual will be used by entry-level technicians, so it should be clear, concise, and formatted using IEEE citation style, with screenshots of each step from LabSim 14.1 and for Video Cards only, use LabSim 3.12. Your manual should be similar to step-by-step instructions on How to Change the Oil in Your Car. Note carefully how in this example, not only is each step described individually, and in detail, but also there is a visual representation of each step. You should model your submission along the same lines. Keep in mind that your manual will be used as a guide for new technicians.

The manual should not document how to complete a LabSim section; rather, it should provide detailed instructions on how to build an actual computer for a potential customer:

“Drag the motherboard from the shelf to the motherboard plate in the system case.”

“After properly grounding yourself, pick up the motherboard and place it inside the area where the motherboard will sit in the case. Align the screw holes on the motherboard with the screw holes on the case. Use appropriate screws to mount the motherboard inside the case, making sure not to scratch the surface of the motherboard.”

To learn about the required parts which must be present in your submissions, and to learn how you will be assessed on this assignment, please take a moment to review the rubrics.

The manual will be submitted in three separate parts. Part 1 addresses Sections 1-5 of the overall manual, Part 2 addresses Sections 6-10, and Part 3 addresses Sections 11-12.

PC Build & Manual Part 1:

1. Workspace Preparation (LabSim 2.0)
2. Installing Motherboard (LabSim 3.3)
3. Installing Power Supply (LabSim 3.2)
4. Installing CPU (LabSim 3.5)
5. Installing RAM (LabSim 3.7/3.8)

Computer Requirements

–

· use the motherboard provided on the shelf

· appropriate power supply that support the motherboard

· fastest processor possible (available on the shelf and compatible with the motherboard)

· maximum memory possible in dual channel mode

· single hard drive

· single CD-DVD drive

· single video card

Manual Sections

–

In addition to including the sections listed below, your manual should

· address the environment in which the computer build will take place. For example, what are the best practices when working in a carpeted room?

· not use computer jargon. Although the manual will be used to train new technicians, it may also be used by someone with limited computer knowledge, so the manual must be easy to understand.

· include explanations on methodology. For example, why is it important to use an antistatic grounding bracelet when working with the computer? Or why is it important to install memory sticks in pairs?

The 12 sections of the overall manual are as follows:

1. Workspace Preparation (LabSim 2.0)

2. Installing Motherboard (LabSim 3.3)

3. Installing Power Supply (LabSim 3.2)

4. Installing CPU (LabSim 3.5)

5. Installing RAM (LabSim 3.7/3.8)

6. Installing Hard Drive (LabSim 5.2)

7. Installing Optical Drive (LabSim 5.3)

8. Installing Video Card (LabSim 3.12)

9. Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)

10. BIOS Configuration (LabSim 3.10)

11. Installing Windows 10 (LabSim 10.3)

12. Configuring Critical Windows Features (LabSim 9.0, 10.0, 11.0, 12.0 and 13.0)

It has been said that the advantage that leading-edge retailers such as Target and Walmart have over their competition isn’t technology; it’s their management. 

Do you agree? Why or why not?

Include a reference to at least one online article to back up your argument. Additionally, please respond to at least one other student’s post.

the post i want to to respond to is “I think that this statement may have been very true in the past, and it may still be true for well-established companies like Walmart because they are not concerned with becoming leading-edge, as they have already been there for many years. However, I think that for many businesses, especially small and/or new businesses, technology is exceptionally important to get a leg up. For example, this summer, I worked for PayPal, and one of the internship programs I participated in was to partner with a Kiva (small) company to propose solutions to one of their business problems. Most of the Kiva companies PayPal partnered with, including the one I worked directly with, really struggled, especially now during COVID-19, with staying afloat, let alone thriving, in the shift to online shopping that is even more strong in the recent months than it was before. For companies like these, finding better ways to showcase their products, communicate with customers, and simply get their website to show up on search engine results are very important tasks to tackle in the present. Perhaps as companies grow in their success, the relative importance of management and technology may reach closer to an equal balance.

The following makes many points about tech in businesses, including marketing : https://smallbusiness.chron.com/information-technology-business-success-4019.html”

 Why is it important for business strategy to drive organizational strategy and IS strategy? What might happen if the business strategy was not the driver?