Strategic Plan Components

Directions

List and describe the components of an information technology strategic plan.

Format

Students should use the following format for their written assignments.

  1. Cite your resources in APA Style
  2. Use Times New Roman—12-point font.
  3. Use professional language.
  4. Include a reference page

InfoTech Import in Strat Plan (ITS-831)

Research Paper: Final Portfolio Project

Word count: 5-8 pages in length, not including the required cover page and reference page

The final portfolio project is a three-part activity. You will respond to three separate prompts but prepare your paper as one research paper. Be sure to include at least one scholarly source per prompt, in addition to your textbook (which means you’ll have at least 4 scholarly sources cited). 

Start your paper with an introductory paragraph.

Prompt 1 “Data Warehouse Architecture” (2-3 pages): Explain the major components of a data warehouse architecture, including the various forms of data transformations needed to prepare data for a data warehouse. Also, describe in your own words current key trends in data warehousing. 

Prompt 2 “Big Data” (1-2 pages): Describe your understanding of big data and give an example of how you’ve seen big data used either personally or professionally. In your view, what demands is big data placing on organizations and data management technology? 

Prompt 3 “Green Computing” (1-2 pages):  One of our topics in Chapter 13 surrounds IT Green Computing. The need for green computing is becoming more obvious considering the amount of power needed to drive our computers, servers, routers, switches, and data centers. Discuss ways in which organizations can make their data centers “green”. In your discussion, find an example of an organization that has already implemented IT green computing strategies successfully. Discuss that organization and share your link.

Conclude your paper with a detailed conclusion section. 

The paper needs to be approximately 5-8 pages long, including both a title page and a references page (for a total of 7-10 pages). Be sure to use proper APA formatting and citations to avoid plagiarism.

Your paper should meet the following requirements:

Be approximately 5-8 pages in length, not including the required cover page and reference page.

Follow APA7 guidelines. Your paper should include an introduction, a body with fully developed content, and a conclusion.

Support your answers with the readings from the course, the course textbook, and at least three scholarly journal articles to support your positions, claims, and observations, in addition to your textbook. Be clearly and well-written, concise, and logical, using excellent grammar and style techniques. You are being graded in part on the quality of your writing.

Reading resources:

1. Managing and Using Information Systems, Keri E. Pearlson, Carol S. Saunders, Dennis F. Galletta, John Wiley & Sons

plagiarism check required, APA7 format, include References, within 8hrs

Digital Forensics Tools and Tech – New England

 

Use the web or other resources to research at least two criminal or civil cases in which  recovered files played a significant role in how the case was resolved.

Use your own words and do not copy  the work of another student.

300 Words – APA format!

Emerging Technologies Research Paper

Subject:  Emerging Technologies 

Book: Technology Ventures: From Idea to Enterprise 

Research project in stages throughout the course, to include:  selecting a topic, submitting an abstract/outline, and submitting final project (paper) for evaluation.  Must support work by using at least six appropriate, properly cited sources in addition to your course textbook. Project (paper) will comprise 3000 to 3500 words (not including title and reference pages).  

1st need  project abstract/outline

2nd research paper 3000+

Project (paper) must be formatted according to APA guidelines as a Word document, double spaced, Times New Roman, 12-font, with one inch margins.

Question:

Many new clean tech ventures have relied on funding and partnership from established corporations. Select a recently funded clean tech venture with corporate venture involvement. Did the funding impact the structure of the new venture? What does the new venture expect to gain from the backing by the larger corporation? What does the larger corporation expect to gain from being involved in the new venture?

bsp w6

In 250 words
 

Do a bit of research on JSON and AJAX.

How do they relate to the Same-Origin policy?

Homework Help

 

Final Exam DPEE

Note: 

· For demonstrating conceptual understanding, you are required to work on the model that is easier to handle or compute, not necessarily the more suitable (or more complicated) model for the dataset. Follow the question description. 

· You don’t need to check the assumption of a model unless the question asks for it. For example, if the question asks you to make prediction based on a model, you don’t need to check the assumption for the model before making prediction. 

· For any of the testing (hypothesis test) problem, define Ho/Ha, compute the test statistic, report the exact p value, and state the conclusion. The default alpha value is 5%, unless specify. 

· Elaborate your reasoning clearly and show relevant plots, R results, and tables to support your opinion in each step and conclusion. 

· Submit the Rmd file and the corresponding pdf file knitted from it, along with your answer, this format is similar to your homework. 

· The data is real, just like the project you are working on. Hence it is possible that even after the remedial method has been done, the model is still not perfect. When this happens, evaluation will be based on the level you execute the methods covered in Stat512 to improve the model. Don’t worry if your model is not perfect, try your best to demonstrate the skill set you learn in this class. 

Study the data with a linear analysis and complete the problems. The data set, dataDPEE.csv has 3 continues predictors and two categorical predictors. 

Problem 1. Consider only the first order model with X1, X2 and X3, perform the following hypothesis. 

a. (10) whether X1 can be dropped from the full model. 

> dpeemod <- lm(y ~ x1 + x2 + x3)

> plot(dpee)

> summary(dpeemod)

Call:

lm(formula = y ~ x1 + x2 + x3)

Residuals:

Min 1Q Median  3Q Max 

-15.948 -11.640 -1.480 6.402 31.650 

Coefficients:

Estimate Std. Error t value Pr(>|t|) 

(Intercept) 90.79017 22.07408 4.113 0.00106 **

x1 -0.68731 0.47959 -1.433 0.17377 

x2 -0.47047 0.24227 -1.942 0.07254 . 

x3 -0.06845 0.46523 -0.147 0.88513 

Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1

Residual standard error: 14.75 on 14 degrees of freedom

Multiple R-squared: 0.6257, Adjusted R-squared: 0.5455 

F-statistic: 7.8 on 3 and 14 DF, p-value: 0.002652

Ho: X1 is significant and cannot be dropped from the model.

Ha: X1 can be dropped from the model. 

Using the model Y~X1 + X2 + X3, 

b. (10) whether X1 can be dropped from the model containing only X1 and X2. 

Problem 2 (10) Consider the first order model with X1, X2 and X3, simultaneously estimate parameters (beta1, beta2 and beta3)  with a confidence level of 75%. 

Problem 3 (20) Perform appropriate analysis to diagnose the potential issues with the first order full mode with X1 X2 and X3, improve the model as much as possible with the methods covered in Stat512. You should also consider the assumption checking for your revised model.  

Problem 4 

a. (10) Compute AIC, BIC, and PRESSP to compare the following two models. 

· The model on the first order terms for X1 and X2 and the interaction term X1X2.

· The model on the first order terms for X1, X2 and X3 

Do they all yield the same better model? If not, explain. 

b. (10) Select the model that you think is better to predict the mean response value, then predict the mean response for the following case, at a confident level of 99%. 

x1

x2

x3

45

36

45

Problem 5 

X4 and X5 are two factors on Y.

a. (10) Is there any significant interaction effect between X4 and X5 on Y? 

b. (10) With the ANOVA method, compute the 95% confidence interval for the following difference, respectively: 

D1= The difference in the mean of Y when (X4=high, X5=less) and (X4=high, X5=more) 

D2= The difference in the mean of Y when (X4=low, X5=less) and (X4=low, X5=more) 

c. (10) With the ANOVA method, compute the 95% confidence interval for 

D1-D2

Where D1 and D2 are described in b. 

How is your result related to a? 

One Page outline of a Term Paper on are there any loopholes in the IT ACT 2000?

 Submit a one page outline with your proposed term paper title, thesis statement, and an outline of the subtopics you will cover in your paper. The term paper details are listed below. ALL TOPICS MUST BE APPROVED. A FAILURE TO HAVE THE TOPIC APPROVED WILL RESULT IN A ZERO GRADE FOR THE TERM PAPER OUTLINE AND THE TERM PAPER. You can send a message with the topic for approval.

This project provides you with the opportunity to increase and demonstrate your understanding of cyberlaw theory and practice. You will need to choose a law(s) that you are interested in researching. The paper must be 4-6 pages in length detailing the below questions. Before completing the below steps, please make sure that the topic is approved.

1. Thesis: What law are you researching (You are to choose a specific law. Please do not choose a topic)? What position do you want to take in regard to your chosen law? You will need to decide if you agree or disagree with the current way the law is written. You can choose to like certain aspects of the law and not others.

2. Background: What is the existing point you want to challenge or support, and how did the law get to be that way (This is where you would need to find cases, background information, etc.)?

3. Inadequacies: What are the deficiencies in the present way of doing things, or what are the weaknesses in the argument you are attacking?

4. Adequacies: Discuss the positive aspects of the law?

5. Proposed Changes: How will we have a better situation, mode of understanding or clarity with what you are advocating? In short, how can the law be improved (or not diminished)? (This is where you have the chance to change the law with your own ideas of how it should be written).

6). Conclusion: Why should and how can your proposal be adopted?

A detailed implementation plan is NOT expected, but you should provide enough specifics for practical follow-up. In making recommendations, you are expected to draw on theories, concepts, and reading 

Use the information below to help with the outline for the term paper

 Are there any loopholes in the IT ACT 2000?

Yes, there are many weaknesses and loopholes revolving around Information Technology Act, 2000 even after the 2008 amendments. They are as follows:

  1. ITA 2000 does not deal with Proper Intellectual Property Protection for Electronic Information and Data. Contentious yet very important issues concerning online copyrights, trademarks, and patents have been left unnoticed by the law, thereby leaving many loopholes.
  2. It does not pay any heed to Domain Name related issues. It does not deal with the rights and liabilities of domain name holders.
  3. It does not cover various evolving forms and manifestations of cybercrimes such as:
  • Cyber theft;
  • Cyberstalking;
  • Cyber harassment;
  • Cyber defamation;
  • Cyber fraud;
  • Chat room abuses;
  • Misuse of credit card numbers.

4. It does not touch upon antitrust issues.

5. It is not explicit about the regulations of electronic payments.

And the biggest flaw is the improper implementation of the cyber laws as the police stations are not well equipped with the required technology and technical skills associated with them.

This week’s journal article focuses on attribution theory and how it influences the implementation of innovation technologies.

 

Required Reading:

Read Se Yeon Choi, Goo Hyeok Chung, & Jin Nam Choi. (2019). Why are we having this innovation? Employee attributions of innovation and implementation behavior. Social Behavior & Personality: An International Journal, 47(7), 1–13. https://doi.org/10.2224/sbp.8124

http://search.ebscohost.com/login.aspx?direct=true&AuthType=shib&db=pbh&AN=137631636&site=eds-live&custid=s8501869&groupid=main&profile=eds_new

Assignment

This week’s journal article focuses on attribution theory and how it influences the implementation of innovation technologies. Two types of employee attributions are noted in the article (intentionality and deceptive intentionality), please review these concepts and answer the following questions:

Provide a high-level overview/ summary of the case study

Note how constructive intentionality impacts innovation implementations

Find another article that adds to the overall findings of the case and note how attribution-based perspective enhances successful innovation implementations. Please be explicit and detailed in answering this question.

Be sure to use the UC Library for scholarly research. Google Scholar is also a great source for research. Please be sure that journal articles are peer-reviewed and are published within the last five years.

The paper should meet the following requirements:

3  pages in length (not including title page or references)

APA guidelines must be followed. The paper must include a cover page, an introduction, a body with fully developed content, and a conclusion.

A minimum of five peer-reviewed journal articles.

The writing should be clear and concise. Headings should be used to transition thoughts. Don’t forget that the grade also includes the quality of writing.